Can I transfer my license to another PC or another user?
The following instructions explain how to perform license
portability with SNA release 3.2 and newer. If you are using an older
release, please contact Daintree
Support to find out how you can obtain this functionality.
Note that the previous method of releasing and activating
licenses was supported only until 31-Dec-2009, after which the Daintree
licensing server was disconnected.
Licensing for the SNA software is provided through a dedicated USB
hardware dongle. You can use the software ONLY on a computer to which
the dongle is connected. Therefore, you can install the SNA software on
as many computers as you want.
- If you try to start the SNA and no license dongle is detected, an error message tells you to insert the dongle and try again.
- If you remove the dongle from a computer on which the SNA software
is running, an error message tells you that the dongle is missing, and
the SNA software shuts down (without giving you the option to save
capture or session files).
- Your dongle will run only the edition and release of the SNA you
have purchased (for example, you cannot use a Standard dongle to run a
Professional edition of the software, or use a dongle for release 2.4
to run the newer release 3.2).
To transfer the license from one computer to another, you simply
unplug the dongle from the first computer and connect it to a second
one on which the SNA software is installed. Before unplugging the
dongle to transfer the license, make sure you first save any capture or
session files.
|
|
